Op het moment werkt het contact formulier niet. Mails kunt u sturen naar [email protected]

Excuses voor het ongemak.

+31 (0) 617148370 (Whatsapp Chat Only)

Plastimo veiligheidslijn < 1m + < 2m elastisch, 3 haken

Single or double tether, with one elastic line. 3-hook model features 2 lines (one straight + one elastic).

Artikelnummer: OD A57305

(Tijdelijk) niet leverbaar

Normale prijs: € 76,50

€ 72,95

Details

Tips & tricks

When using a harness or lifejacket in conjunction with a tether, make sure that both are designed to the same standard, and more specifically to the same breaking strain level.

Combining tether & lifejacket : do you have the right life jacket?

A tether is the indispensable accessory which makes an inflatable lifejacket a fully featured safety equipment... provided of course that you have selected originally the correct lifejacket, a model "with harness" that will offer the resistance required by EN ISO 12401 standard : as strong as your tether may be, it will only fulfill its mission if it is combined with a lifejacket capable of holding the same tensile strength. A tether must not be amateur-assembled : its resistance is determined by a standard (breaking strain, materials used and safety sewing process) and should only come from a bona fide manufacturer.

How to identify if you have the right Plastimo inflatable lifejacket, complying with EN ISO 12401 :

  • waist belt is wider on a lifejacket with harness : 46 mm wide, in polyester with 2500 daN resistance.
  • buckles are in stainless steel on the majority of our lifejackets with harness, or in Dyneema textile on SL180 lifejacket.
  • regulation tag must mention both standards : EN ISO 12402 for buoyancy and visibility, and EN ISO 12401 for breaking strain.

If your lifejacket does not carry the ISO 12401 mention or if it features plastic buckles, it does not provide the resistance required to be used as a harness and cannot accept a tether.

Last but not least, do not overlook the age of the lifejacket or tether : the ageing and general condition of the webbing impacts negatively its level of performance.

  • 50 mm wide webbing + double action safety hooks
  • Strain indicator, compliant with ISAF / ORC recommendations.

To be used in conjunction with a safety harness or an inflatable lifejacket (model with integrated harness).

Strain indicator complies with ISAF specifications :

When the tether is submitted to a heavy load (ex. man over board), the strain indicator exposes a label showing that tether should be replaced.

Tether essential features :

  • Number of lines : a double tether has 2 lines. It enables you to remain clipped as you move about the deck.
  • Number of hooks : there is not systematically a hook at both ends ; the tether can be attached to the harness via a webbing loop (see photo : tether ref. 31558).
  • Length of lines : standard length is 2 m. In the case of a double tether, the 2nd line is reduced to 1 m so that you can clip yourself on a shorter length. The very principle of a harness is to prevent a man falling overboard and being dragged ; one must therefore be clipped on a short length, as often as possible.
  • Elasticity : this model stretches out when needed and contracts when not under tension, which contributes to a greater freedom of movement and improved safety, as it is kept short and tidy to prevent accidental snagging.

Models

Ref. Model Hooks
57305 1 straight line < 1m + 1 elastic line < 2m 3 double safety hooks
51564 1 elastic line < 2m 2 x Wichard
57316 1 elastic line < 2m 2 x double action safety hooks

Extra informatie

Artikelnummer OD A57305
EAN 3162420573056
Fabrikantnummer 57305
Product type Veiligheidslijnen
Merk Plastimo

Schrijf je eigen review

U plaatst een review over: Plastimo veiligheidslijn < 1m + < 2m elastisch, 3 haken

Hoe waardeert u dit product? *

  1 ster 2 sterren 3 sterren 4 sterren 5 sterren
Beoordeling