Op het moment werkt het contact formulier niet. Mails kunt u sturen naar [email protected]

Excuses voor het ongemak.

+31 (0) 617148370 (Whatsapp Chat Only)

Conische moer anode hexagonaal 30mm

ZINC, compliant with MIL-A-18001K

Artikelnummer: OD A38253
 Op bestelling
Verwachtte verzending tussen woensdag 3 apr en donderdag 4 apr.*

€ 14,50

Details

Tips & tricks

Standard anodes protect elements common to all boats (shafts, hull...).
Some anode models are specific to a motor or thruster brand (always refer to the manufacturer’s recommendations).

INSTALLATION

The anode must be in direct contact with the metal it protects : never paint around an anode or the anode itself.
Do not fit magnesium anodes on wooden hulls as it would deteriorate the boat structure.

WHEN SHOULD ANODES BE REPLACED ?

Anodes deterioration rate may fluctuate according to the mooring area, water salinity, PH and temperature, potential electrical failure on board, and of course, the quality of the anodes themselves.
A good benchmark for replacement is when the anode is 70-80 % dissolved. Plastimo recommends to replace anodes every year when doing the boat antifouling/launching. In all cases, anodes deterioration should always be watched carefully together with the condition of the metal parts they protect.

IMPORTANT :

On the opposite, anodes may dissolve quickly if they are bad quality or if there is an electrical failure on board (check the batteries, the right earth connection to the dock, the proper cathodic protection of your marina neighbours, ... ).

Models

Ref. Model Shaft Ø Ø A Ø B C H Weight
38248 Conical 30 mm 44 mm 21 mm 32 mm 52 mm 0,290 kg
38249 Conical 35 mm 44 mm 24 mm 37 mm 52 mm 0,4 kg
38250 Conical 40 mm 49 mm 27 mm 42 mm 65 mm 0,540 kg
38251 Conical 45 mm 59 mm 31 mm 48 mm 74 mm 0,9 kg
420250 Conical 50 mm 73 mm 39 mm 57 mm 84 mm 1,150 kg
420265 Conical 55 mm 73 mm 42 mm 65 mm 85 mm 1,120 kg
401234 Conical 60 mm 82 mm 46 mm 71 mm 95 mm 1,7 kg
38252 Hexagonal 22-25 mm 32 mm 26 mm 23 mm 39 mm 0,135 kg
38253 Hexagonal 30 mm 41 mm 30 mm 27 mm 57 mm 0.270 kg
38254 Hexagonal 35 mm 44 mm 38 mm 32 mm 58 mm 0.350 kg
38255 Hexagonal 40 mm 50 mm 41 mm 36 mm 65 mm 0.460 kg
420204 Hexagonal 45 mm 61 mm - 41 mm 76 mm 0.780 kg
420205 Hexagonal 50 mm 73 mm - 46 mm 84 mm 0.990 kg
420206 Hexagonal 60 mm 82 mm - 55 mm 98 mm 1,6 kg
38247 Conical 25 mm 32 mm 16 mm 25 mm 39 mm 0.14 kg

Extra informatie

Artikelnummer OD A38253
EAN 3162420382535
Fabrikantnummer 38253
Product type Anoden
Merk Plastimo
Materiaal Zink
Soort Dopmoer anode

Schrijf je eigen review

U plaatst een review over: Conische moer anode hexagonaal 30mm

Hoe waardeert u dit product? *

  1 ster 2 sterren 3 sterren 4 sterren 5 sterren
Beoordeling